![]() Note 1: Some boards may have the TxD and RxD reversed. Solder the 3 wires to the corresponding terminals on the new board. Unsolder the 3 wires connected to the board. Take a small screw driver and pry the open the case from the back where the cable enters. Long story short… It’s the same thing that’s in your current cable now, except these work.ĬP2102 boards can be found on eBay for around $2 and on Amazon. All you need is a small flat blade screwdriver, a soldering pencil, and a CP2102 board. ![]() It’s truly Plug ‘n Play, and costs about $20.īut here’s a project that just might solve the issue for around $2. There are a few options available, such as an FTDI cable. ![]() (NOT going to happen)īut wait, yours has the company name and logo right on the cable. This is like buying a roll-away treadmill and putting it in the closet until the next time you want to exercise. Put the radio in the drawer to be worked on later. You’re fighting with error messages:Īnd Windows (TM) 10 keeps changing your drivers. ![]() You purchased a radio and programming cable, loaded the software, and that’s as far as you’ve gotten. ![]() This $2 solution might just be your ticket to sanity. Frustrated with that generic programming cable? ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |